Suppliers of Activated Carbon Filtration Products to Australia and New Zealand
GC WATERCARB activated carbon meets the latest requirements of the AWWA standard for treatment of potable drinking water and is totally compatible with all municipal water treatment use and application systems. A representative sales specification is shown below:
| Molasses Decolorizing Efficiency: | 40 (min.) |
| Iodine No., mg/g: | 500 (min) |
| Moisture, % (when shipped): | 8(max) |
| Tannin Value, (mg/L) | 360(avg.) |
| Typical Density, lbs./cu.ft.: | 39 (avg.) |
| Typical Density, g/cc:s | 0.62(avg.) |
Fineness, U.S. Sieve Series |
|
| Thru 100 Mesh, %: | 99(min) |
| Thru 200 Mesh, % | 95(min) |
| Thru 325 Mesh, %: | 90(min) |
Packaging is in either 50 lb.or 900 lb. bags. Delivery via bulk tanker is also available.
Caution!
Wet activated carbon removes oxygen from air causing a severe hazard to workers inside carbon vessels. Confined space/low oxygen procedures should be put in place before any entry is made. Such procedures should comply with all applicable local, state and federal guidelines.
> View the Activated Carbon MSDS